WIRELESS FIELD TEST

Sellacious Quote Cart

Not any quotes added to cart
Open Quotation Cart

Wireless Test Solutions for the Field Engineer

Top Dog offers multiple solution that are commonly used for testing wireless communication networks in the field.  See below for the most commonly used solutions.   Please contact s if you don't see what you are looking for here.  We list over 70,000 products and can help you find exactly what you are looking for or other possible solutions that would meet your test requirements.

Anritsu PIM Masters

MW82119A / MW82119B

Passive Intermodulation (PIM) Analyzer with Site Master™ with Cable & Antenna Analyzer Option and options for 700 MHz, 800 MHz, 850 MHz, 900 MHz, 1800 MHz, 1900/2100 MHz, 2100 MHz, 2600 MHz (MW82119A have been replace by MW82119B but are still widely available and supported by Top Dog Test).

Typical Options include:

  • 0700 LTE 700
  • 0850 Cellular 850
  • 0900 E-GSM 900
  • 0180 DCS 18000190 PCS 1900
  • 0192 PCS/AWS 1900/2100
  • 0019 High Accuracy Power Meter
  • 0031 GPS Receiver

Browse MW82119A Models
Browse MW82119B Models

 

Anritsu Site Masters

S331L & S3xxE Models

Handheld Cable & Antenna Analyzer featuring Classic & Advanced Modes with 2 MHz to 4 GHz with Cable & Antenna Analyzer and 50 MHz to 4 GHz Power Meter

Available Models:

  • S331E 2 MHz to 4 GHz Cable & Antenna Analyzer
  • S332E 2 MHz to 4 GHz Cable & Antenna Analyzer & 9 kHz to 4 GHz Spectrum Analyzer
  • S361E 2 MHz to 6 GHz Cable & Antenna Analyzer
  • S362E 2 MHz to 6 GHz Cable & Antenna Analyzer & 9 kHz to 6 GHz Spectrum Analyzer
  • S331L 2 MHz to 4 GHz Cable & Antenna Analyzer with 50 MHz to 4 GHz Internal Power Meter

Click on model names for more details

 

3Z Telecom

RF Vision Antenna Alignment Tool

The 3Z RF Aligner is the world’s leader Antenna Alignment Tool for both panel antennas and microwave systems. The 3Z RF Aligner reduces site re-visits and re-climbs by optimizing network Performance.

The 3Z RF Aligner is the most compact GPS Antenna Alignment Tool in the industry. It incorporates GPS Technology to calculate precise Azimuth, Tilt, Roll and AGL measurements for a multitude of directional antenna systems. Our universal antenna mounting system is used for quick antenna attachment and release. The 3Z RF Aligner is user friendly and easy to transport up any tower. Save all your antenna installation measurements for recordkeeping and reporting; easily accessible over USB.

https://youtu.be/z-NwMy0AuZ4

> Click here for more information

 

 

Sunsight Instruments

AAT – Antenna Alignment Tool

The lightest and most accurate antenna alignment tool used during equipment installation or antenna position audits. It measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground level. The Antenna Alignment Tool features a quick capture feature for on-site captures if antenna position data not available prior to climb. Get antenna installs right the first time, eliminate costly site re-visits or re-climbs.

It is the most durable Antenna Alignment Tool on the market, with its powder-coated aluminum housing, it is weatherproof and rugged for tough conditions General Contractors work in. The antenna alignment tool is simple to operate and can mount to any antenna location. In seconds, a person can take a reading from any WiFi enabled device, instantly creating a permanent record of an antenna alignment for accountability and traceability. Desired equipment position can be input prior to climb or entered into the tool on-site.

Records can be downloaded (via PDF or CSV) at a later time to be used by contracting companies or quality control departments to certify the installation work was performed as specified.

> AAT08 (small)
> AAT15 (medium)
> AAT30 (large)
> AAT (first gen)

 

ODM

TTK 720 – Fiber Inspection, Test and Cleaning Kit

An all-in-one solution to fiber optic testing needs built around the VIS 300C-PM-02 inspection and test tool with Optical Power Meter (OPM) and Visual Fault Locator (VFL). Includes a high-definition inspection scope with inspection tips for automated analysis of fiber endfaces.

Contains a complete system of “one-click” dry cleaners and lint-free wipes with fiber optic-grade solution for wet/dry cleaning. These tools clean endfaces to meet IEC 61300-3-35 standards. The onboard OPM and included DLS 355 dual laser source along with single mode test jumpers you can gather dB loss and/or dBm power readings on single mode fiber. Results are saved directly to the VIS 300C system for field viewing and editing.

> Click here for more information

 

ODM

OTR 700-S – Optical Time Domain Reflectometer

The  ODM  OTR  700  tests optical reflection and loss in fiber networks. The optional video scope allows for extensive options in endface inspection, ensuring industry acceptable optical connections. The unit comes in single mode (1310/1550nm), multi-mode (850/1300nm), or  quad  wavelength  configurations,  making  the  OTR  700  the  perfect option for all fiber installations.

Power Meter, Light Source, and/or VFL are optional with all OTR 700 units. With these add-ons, technicians can test for dB loss in trunk and sector fibers to confirm that each fiber is functioning correctly. The OTR offers an event table with PASS/FAIL analysis for each reflective event,  and  the  1  meter  dead  zone  provides  accurate  reflective  event testing in all fiber systems. Each event can be inspected manually using the  event  selection  feature  or  automatically  with  the  device’s  built-in pass/fail function. The OTR 700’s schematic trace view allows technicians
to see just the most important parts of each trace with pertinent data attached.

> Click here for more information

Top Dog Test, Inc.
27732 Industrial Blvd.
Hayward, CA 94545
(510) 324-3001
sales@topdogtest.com